Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Lighting

Sunlite Griplight II
$14.99
• Set of 1 LED white front and 1 LED red rear lights • Ultra bright Cree LEDs • Two mode (Steady and Flashing) • Batteries included (4 x CR2032) • Velcro strap universal mount
Sunlite HiFi Combo
$15.99
- Front 10 lumen, Rear 4 lumen 3 LED - 4 modes each - 1 constant, 3 flashing - AAA batteries included - Water resistant construction - Easy to use, multi fit silicone rubber mount
Sunlite TL-L225 Bracket
$1.99
- Rack mount bracket only - Fits TL-L225 taillight
Sunlite WheelGlow Wheel Light
$23.99
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Specialized Flash 300 Headlight
$49.99
Our latest to-see-by headlight, the Flash 300 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 700mAh battery pack, the Flash 300 will deliver 300 lumens for 1.5 hours, all the way up to 75 lumens for 6 hours. In Flash mode, you get 150 lumens for 12 hours. - 700mAh rechargeable Li-ion battery pack is an economical choice that delivers real-world usable lumens and runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 150 lumens for 12:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 300 lumens for 1:30 hours - Steady Low mode: 75 lumens for 6:00 hours - Steady Medium mode: 150 lumens for 3:00 hours
Specialized Flash 500 Headlight
$59.99
Our latest to-see-by headlight, the Flash 500 brings Flux-style beam control to a more budget-friendly pricepoint. The Flash headlight combines a clean, compact design with a simple-yet-elegant silicone strap that reminds us of a watchband design from our friends in Cupertino. With two different-sized straps included, you can dial in just the right amount of stretch to keep the Flash secure, while ensuring super fast install and removal. Now you see it, now you don't. Thanks to its 1400mAh battery pack, the Flash 500 will deliver 500 lumens for 2 hours, all the way up to 125 lumens for 8 hours. 250 lumens of Flash mode gives you a whopping 16 hours of runtime. - CREE XP-G3 LED delivers big-time lumens. - Class-leading 1400mAh rechargeable Li-ion battery pack to back up those lumens with real-world usable runtimes. Micro USB cable included. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - Flash mode: 250 lumens for 16:00 hours - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes two different-sized straps to fit every round handlebar cockpit. (Flash headlights are not suitable for aero handlebars.) - Installs in seconds with a silicone strap system. Just pull the strap under the handlebar and drop it into the slot on the light body. - Single-LED oval beam pattern gives a perfect blend of spot and peripheral visibility. - Steady High mode: 500 lumens for 2:00 hours - Steady Low mode: 125 lumens for 8:00 hours - Steady Medium mode: 250 lumens for 4:00 hours
Specialized Flux 850 Headlight
$90.00
Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.
Specialized Stix Elite 2 Taillight
$49.99
Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately
Specialized Stix Headset Spacer Mount
$5.00
You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.
Specialized Stix Helmet Strap Mount
$5.00
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
Sigma Nugget Flash
$29.99
The NUGGET FLASH is designed for high traffic roads where safety is a priority. It uses a 1/2 watt, high power LED and Sigma's new FRESNEL lens to provide more than 220° of lateral visibility. It is powered by a USB rechargeable lithium ion battery. The included clip-on bracket lets you use it on a backpack, saddlebag, or your clothing. Functions: - 2 stage battery status indicator - 3 modes: standard, power, and flashing - Adjustable, removable bracket - Burn time up to 8 h - Charge time: 2 h - Click switch with raised ON/OFF button - Includes additional belt clip for backpacks, saddle bags, or clothing - Integrated lithium-ion rechargeable battery - Integrated USB port - Side visibility - Tool-free mounting - Watertight - Weight: 24g
Sigma Rear Brake Light
$9.99
Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g
Planet Bike Blinky 3 Taillight
$10.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
Planet Bike Button Blinky Safety Set
$15.99
The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams
Planet Bike Grateful Red
$19.99
-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams
No Image
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Planet Bike Shiner Helmet & Rack Mount
$5.99
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
Planet Bike USB Charging Cable
$4.99
• USB / Mini USB connections • For use with all Planet Bike USB rechargeable lights
PDW Mission Control Bracket
$9.99
The original Mission Control Bracket is compatible with all Portland Design Works headlights and fits handlebars 22.0-31.8mm in diameter. It provides a rigid mount to keep your headlight exactly where you need it when the going gets rough. And, it allows the light to be rotated left or right a few degrees to center the light beam on bars that are not straight.
PDW StayPutNik Tail Light Bracket
$5.99
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
NiteRider Adventure 180
$35.20
The Adventure 180 features advanced components that deliver optimal performance with multiple output settings including an SOS safety flash. Inside the lightweight body, a lithium polymer battery conveniently charges via USB, reducing waste of disposable alkaline batteries. The Adventure 180 is a well-rounded performer that shines right where you need it so that you can focus on your night adventure. The Tail Light Clip fits all NiteRider Tail Lights and provides greater safety for walking or running at night. Meets FL 1 Standard IP67, protected against the effects of immersion in water to depth between 15cm and 1 meter. - 4 Light levels plus 1 Night Vision Mode - 4 Safety Flash Modes, including SOS - FL1 Standard IP67, water immersion ok between 15 cm and 1 meter - Adjustable headstrap tabs for quick and easy fitment - Adjustable light angle - Fits Pivot Stick-on accessory mount (sold separately) - Convenient USB rechargeable - Low battery indicator
NiteRider CherryBomb 100
$25.99
To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h
NiteRider CherryBomb 35 Taillight
$24.99
For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 35 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 35 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 35 employs a custom made, built in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. - Daylight Visible Flash (DVF) - A wearable safety light – clip onto various straps, belt loops, etc. - Visible up to 1 mile - Internal reflector = visible if light on off mode - Easily replaceable AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - FL 1 Standard IP64, water resistant WARRANTY The CherryBomb 35 is backed by NiteRider’s lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seatpost Mount - 2 AAA Batteries
NiteRider Lumina 1000 Boost
$100.99
The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY The Lumina 1000 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
NiteRider Lumina 1000 Boost/Sabre 110 Combo
$125.99
The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders, and urban commuters. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Lumina Features - Lumen Output: 1000 - 6 Modes with Run Times: 1:00 – 26:00hrs - Charge Time: 2:30 / 5:00 hrs - Weight: 172g - Battery: Li-Ion - Low Battery Indicator - 1000 lumen front bike light with Boost Mode - Water / Dust Resistant IP64 Rated Run Times - Low—6:00h at 200 Lumens - Med—3:30h at 375 Lumens - High—1:30h at 750 Lumens - Boost—1:00h at 1000 Lumens - Pulse Flash—10:30h at 750 Lumens - Fast Flash—6:00h at 750 Lumens - Walk—26:00h at 50 Lumens Sabre 110 Features - Lumen Output: 110 - 6 Modes with Run Times: 1:45 – 17:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
NiteRider Lumina 1200 Boost
$99.99
The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
NiteRider Lumina Handlebar Strap Mount
$13.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Lumina Helmet Mount
$14.99
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider Lumina Micro 650
$74.99
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable
NiteRider Lumina Micro 650/Sabre 110 Combo
$80.99
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. The NiteRider Sabre 110 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye-catching visibility both day and night. Lumina Micro 650 Features - Lumen Output: 650 - 5 Modes with Run Times: 1:30 – 20:00hrs - Charge Time: 1:45 / 3:30hrs - Weight: 130g - Battery: Li-Ion - Low Battery Indicator - Compact and Lightweight - Water / Dust Resistant IP64 Rated Lumina Micro 650 Run Times - Low—7:00h at 150 Lumens - Med—3:00h at 350 Lumens - High—1:30h at 650 Lumens - Flash—6:30h at 650 Lumens - Walk—20:00h at 50 Lumens Sabre Features - Lumen Output: 110 - 6 Modes with Run Times: 2:00 – 60:00hrs - Charge Time: 2:30hrs - Weight: 28g - Battery: Li-Po - Low Battery Indicator - 110 Lumen Super Lightweight Daylight Visible taillight Sabre Run Times - Pulse Flash—7:00h - Flash—6:00h - Fast Flash—17:00h - Steady High—1:45h - Steady Med—4:00h - Steady Low—8:30h
Page 1 of 4 Next page